RED DSMC V5.2 Dokumentacja Pobierz pdf (Strona 168)

167

CTRL (RS232 CONTROL)

A 4-pin LEMO connector supports RS232 remote control for 3D camera communication, and third party

metadata ingest applications.

The shutter Sync Output signal acts as an immediate response hardware tally of a scan. This is useful

for 3D or motion control applications where a slave camera or lighting device needs to be synchronized

to a master camera.

Alternatively, this output pin may be used as a GPO (General Purpose Output) tally, whose function is

programmed in the USER KEYS menu. Default function for the General Purpose Output is Record Tally.

View into camera CTRL (RS232 Control) Interface connector

Mating Connector: LEMO FGG.00.304.CLAD27Z

PIN SIGNAL DESCRIPTION

1 GROUND Common Ground

2 232 RX RS232 RX

3 SS/GPO Shutter Sync / GPO Output

4 232 TX RS232 TX

NOTE: When active, the GPO tally presents 3.3V @ 0.04 Amps maximum between pins 1 and 3.

When used as Sync Out, the rising edge of the pulse indicates start of exposure. When used as a

Tally, the rising edge of the pulse indicates start of record, falling edge represents end of record.

NOTE: A pre-fabricated CTRL interface cable is available from RED Digital Cinema.

• P/N 790-0152 – RS232 – Camera to DB-9 – 3 ft. (1m)

• DB-9 Pin 1: Shutter Sync / GPO

• DB-9 Pin 2: RS232 Tx

• DB-9 Pin 3: RS232 Rx

• DB-9 Pin 4: Ground

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 239 240

Brak uwag

RED DSMC V5.2 Dokumentacja Strona 168