RED ORCHIDEA Instrukcje Operacyjne Pobierz pdf (Strona 35)

red

PELLET STOVES Chapter 4

INSTALLATION AND USE MANUAL

page 35

Operation Technical service - Rights reserved - Reproduction prohibited

PROBE

POS.14

CAVO TERMOSTATO

AMBIENTE

4.12. Connection to a room thermostat

The room thermostat is not included with the stove

and it must be installed by a specialised technician.

WARNING!

The electrical wires must not be in contact with the

hot parts of the stove.

The stove can also be connected to a room thermostat. The procedure

to follow for the connection of the external thermostat is the following:

 Connect the two wires of the cable which come from the room

temperature to the two free terminals of the connector

(position 14 wiring diagram chap.7). To do this it is

necessary to:

o unscrew the protective cap of the probe

o Pass the two wires through the protective cap and

insert them into the hole together with the probe.

o Pull the two wires to carry out connection to the board

corresponding to terminal 14 (see chap.7)

o Close the protective cap again.

To make the stove work according to the temperature set on the

external thermostat it is necessary to bring knob (B) to the minimum

position (15°C).

Please remember that once the temperature is reached, the stove does

not switch off but automatically modulates the flame and room fan to

minimum power.

ROOM THERMOSTAT

CABLE

POS.14

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 47 48

Brak uwag

RED ORCHIDEA Instrukcje Operacyjne Strona 35